Home › Vehicle Exterior › WIPER / WASHER › FRONT WIPER RUBBER
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248407 FRONT WIPER RUBBER A

WIPER / WASHER  FRONT WIPER RUBBER  REPLACEMENT  


PROCEDURE

Hide 85220B 1.REMOVE FRONT WIPER BLADE

a.

Disengage the holder of the front wiper blade.

E229009E01
1.526,0.111 1.678,0.256 0.152,0.145 10 *1 1.694,0.177 2.354,0.313 false 3,0.393 3.152,0.537 0.152,0.145 10 *2 3.168,0.459 3.566,0.541 false 5.247,1.113 5.399,1.258 0.152,0.145 10 *3 5.414,1.179 6.056,1.098 false

Text in Illustration
*1 Front Wiper Arm *2 Holder
*3 Front Wiper Blade - -


b.

Remove the front wiper blade from the front wiper arm as shown in the illustration.

NOTICE:

Do not fold the front wiper arm with the front wiper blade removed. The arm tip could damage the windshield surface.



Hide 85214C 2.REMOVE CENTER WIPER BLADE RUBBER

a.
E125259

Remove the center wiper blade rubber with the 2 wiper rubber backing plates from the front wiper blade.


b.
E184495

Remove the 2 wiper rubber backing plates from the center wiper blade rubber.


Hide 85214C 3.INSTALL CENTER WIPER BLADE RUBBER

a.
E184496

Install the 2 wiper rubber backing plates to the center wiper blade rubber.

NOTICE:
·

Align the protrusions on the center wiper blade rubber with the notches in the 2 wiper backing plates.

·

Align the curves of the 2 wiper backing plates with the curve of the windshield glass.




b.
E125261

Install the center wiper blade rubber to the front wiper blade with the tip of the rubber (curved end) facing the axis of the wiper arm.

HINT:

Firmly push the center wiper blade rubber into the front wiper blade to securely engage them.



Hide 85220B 4.INSTALL FRONT WIPER BLADE

a.

Install the front wiper blade as shown in the illustration.

E229010E01
2.89,0.283 3.040,0.434 0.151,0.151 10 *2 5.874,0.124 6.025,0.275 0.151,0.151 10 *1 1.07,1.158 1.220,1.309 0.151,0.151 10 *3 1.231,1.221 1.698,1.029 false 3.061,0.352 3.477,0.582 false 6.031,0.198 6.653,0.361 false

Text in Illustration
*1 Front Wiper Arm *2 Holder
*3 Front Wiper Blade - -


b.

Engage the holder on the front wiper blade.