Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248409 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  INSTALLATION  


PROCEDURE

Hide 84650 1.INSTALL WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E229019

Engage the claw and install the windshield wiper switch.


b.

Connect the 2 connectors.


Hide 45286B 2.INSTALL UPPER STEERING COLUMN COVER

a.

Engage the claw and install the upper steering column cover.


Hide 45287 3.INSTALL LOWER STEERING COLUMN COVER

a.

Engage the 3 claws to install the lower steering column cover.


b.

While turning the steering wheel to the right and left, install the 2 screws.


c.

Install the screw to the lower portion of the lower steering column cover.

NOTICE:

After installing the steering column cover lower, check to make sure that it does not rattle and is not loose. If the steering column cover lower is loose or rattles, replace the installation grommet for the lower side screw with a new one.