Home › Vehicle Exterior › WIPER / WASHER › WIPER SWITCH
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248409 WIPER SWITCH A

WIPER / WASHER  WIPER SWITCH  REMOVAL  


PROCEDURE

Hide 45287 1.REMOVE LOWER STEERING COLUMN COVER

a.

Release the tilt lever, and fully extend and lower the steering column.


b.
E229016

Remove the screw from the lower portion of the lower steering column cover.


c.

While turning the steering wheel to the right and left, remove the 2 screws.


d.

Disengage the 3 claws and remove the lower steering column cover.


Hide 45286B 2.REMOVE UPPER STEERING COLUMN COVER

a.
E229017

Disengage the claw and remove the upper steering column cover.


Hide 84650 3.REMOVE WINDSHIELD WIPER SWITCH ASSEMBLY

a.
E229018E02
1.021,1.25 1.563,0.771 true 0.844,1.167 1,1.323 0.156,0.156 10 true *1

Disconnect the 2 connectors.

Text in Illustration
*1 Protective Tape


b.

Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the windshield wiper switch as shown in the illustration.

NOTICE:

If the claw is pushed with excessive force, it may break.