Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE(for Front Side) › 2011.08–2014.07
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248412 WASHER NOZZLE(for Front Side) G

WIPER / WASHER  WASHER NOZZLE(for Front Side)  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85035 1.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for LHD)

a.

With the engine running, check where the washer fluid hits the windshield.

E229456E01
3.717,2.588 3.839,2.736 0.122,0.149 10 A 3.395,2.548 3.517,2.697 0.122,0.149 10 B 3.026,2.673 3.148,2.822 0.122,0.149 10 C 2.871,3.084 2.993,3.233 0.122,0.149 10 D

Standard:
Area Measurement Area Measurement
A 89 mm (3.50 in.) C 39 mm (1.53 in.)
B 204 mm (8.03 in.) D 18 mm (0.708 in.)


OK:

Washer fluid hits the windshield in the areas as shown in the illustration.


If the result is not as specified, adjust the washer nozzle sub-assembly.


Hide 85035 2.INSPECT WASHER NOZZLE SUB-ASSEMBLY (for RHD)

a.

With the engine running, check where the washer fluid hits the windshield.

E221563E01
3.374,2.52 3.488,2.655 0.114,0.135 9 A 3.696,2.472 3.810,2.608 0.114,0.135 9 B 4.057,2.572 4.171,2.707 0.114,0.135 9 C 4.225,3.001 4.339,3.136 0.114,0.135 9 D

Standard:
Area Measurement Area Measurement
A 75 mm (2.95 in.) C 36 mm (1.41 in.)
B 160 mm (6.29 in.) D 14 mm (0.551 in.)


OK:

Washer fluid hits the windshield in the areas as shown in the illustration.


If the result is not as specified, adjust the washer nozzle sub-assembly.