Home › Vehicle Exterior › WIPER / WASHER › WIPER AND WASHER SYSTEM
RM19S0E _59 Vehicle Exterior _051504 WIPER / WASHER _0248414 WIPER AND WASHER SYSTEM L

WIPER / WASHER  WIPER AND WASHER SYSTEM  PRECAUTION  


WASHER NOZZLE ADJUSTMENT PRECAUTION


a.

Using a thin-bladed screwdriver, the aim of the washer nozzle can be adjusted.

NOTICE:

Do not use a metal pin or other such tool because it may damage the nozzle jet.



b.

If the washer nozzle is clogged with substances such as car wax etc, remove it and clean the nozzle hole with a soft resin brush or other cleaning tool.