1.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY LH
Apply battery voltage to the connector and check the side turn signal light comes on.
| *a | Component without harness connected
(Side Turn Signal Light Assembly LH) |
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Side turn signal light comes on |
If the result is not as specified, replace the side turn signal light assembly LH.
81730
2.INSPECT SIDE TURN SIGNAL LIGHT ASSEMBLY RH
Apply battery voltage to the connector and check the side turn signal light comes on.
| *a | Component without harness connected
(Side Turn Signal Light Assembly RH) |
| Measurement Condition | Specified Condition |
|---|---|
| Battery positive (+) → 1
Battery negative (-) → 2 |
Side turn signal light comes on |
If the result is not as specified, replace the side turn signal light assembly RH.