Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2011.08–2014.07
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248419 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  DISASSEMBLY  


PROCEDURE

Hide 81564C 1.REMOVE REAR COMBINATION LIGHT BODY PACKING

a.
E234724

Remove the rear combination light body packing.

NOTICE:
·

Be sure to remove all the traces of the old packing from the body.

·

Do not reuse the removed packing. Be sure to install a new rear combination light body packing to prevent water ingress.




Hide 81550H 2.REMOVE TAIL AND STOP LIGHT BULB

a.
E234725

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to remove them.


b.

Remove the tail and stop light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550L 3.REMOVE REAR TURN SIGNAL LIGHT BULB

a.
E228384

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to remove them.


b.

Remove the rear turn signal light bulb from the rear combination light socket and wire sub-assembly.


Hide 81550N 4.REMOVE BACK UP LIGHT BULB

a.
E228386

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to remove them.


b.

Remove the back up light bulb from the rear combination light socket and wire sub-assembly.


Hide 81565 5.REMOVE REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E234726

Disengage the clamp to remove the rear combination light socket and wire sub-assembly.


Hide 81568E 6.REMOVE REAR COMBINATION LIGHT COVER

a.
E229106

Remove the 2 screws and the rear combination light cover.


Hide 81568J 7.REMOVE REAR COMBINATION LIGHT PROTECTOR

a.
E229107

Remove the 2 screws and the rear combination light protector.