Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › 2011.08–2014.07
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248419 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  REASSEMBLY  


PROCEDURE

Hide 81568J 1.INSTALL REAR COMBINATION LIGHT PROTECTOR

a.
E229107

Install the rear combination light protector with the 2 screws.


Hide 81568E 2.INSTALL REAR COMBINATION LIGHT COVER

a.
E229106

Install the rear combination light cover with the 2 screws.


Hide 81565 3.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY

a.
E234726

Engage the clamp to install the rear combination light socket and wire sub-assembly.


Hide 81550N 4.INSTALL BACK UP LIGHT BULB

a.

Install the back up light bulb into the rear combination light socket and wire sub-assembly.


b.
E228387

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.


Hide 81550L 5.INSTALL REAR TURN SIGNAL LIGHT BULB

a.

Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.


b.
E228385

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.


Hide 81550H 6.INSTALL TAIL AND STOP LIGHT BULB

a.

Install the tail and stop light bulb into the rear combination light socket and wire sub-assembly.


b.
E234727

Turn the rear combination light socket and wire sub-assembly with the bulb in the direction indicated by the arrow in the illustration to install them.


Hide 81564C 7.INSTALL REAR COMBINATION LIGHT BODY PACKING

a.
E234724

Install a new rear combination light body packing.