Use the same procedure for both the LH and RH sides.
The procedure described below is for the LH side.
81568J
1.INSTALL REAR COMBINATION LIGHT PROTECTOR
Install the rear combination light protector with the 2 screws.
81568E
2.INSTALL REAR COMBINATION LIGHT COVER (for Sport Package)
Install the rear combination light cover with the 2 screws.
81565
3.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (except Sport Package)
Engage the clamp and guide to install the rear combination light socket and wire sub-assembly.
| *a | Clamp |
| *b | Guide |
Connect the connector.
81565
4.INSTALL REAR COMBINATION LIGHT SOCKET AND WIRE SUB-ASSEMBLY (for Sport Package)
Engage the clamp and guide to install the rear combination light socket and wire sub-assembly.
| *a | Clamp |
| *b | Guide |
Connect the connector.
81550N
5.INSTALL BACK UP LIGHT BULB (except Sport Package)
Install the back up light bulb into the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration to install them to the rear combination light lens and body as a unit.
81550N
6.INSTALL BACK UP LIGHT BULB (for Sport Package)
Install the back up light bulb into the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the back up light bulb in the direction indicated by the arrow shown in the illustration to install them to the rear combination light lens and body as a unit.
81550L
7.INSTALL REAR TURN SIGNAL LIGHT BULB (except Sport Package)
Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them to the rear combination light lens and body as a unit.
81550L
8.INSTALL REAR TURN SIGNAL LIGHT BULB (for Sport Package)
Install the rear turn signal light bulb into the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the rear turn signal light bulb in the direction indicated by the arrow shown in the illustration to install them to the rear combination light lens and body as a unit.
81550F
9.INSTALL TAIL LIGHT BULB (except Sport Package)
Install the tail light bulb into the rear combination light socket and wire sub-assembly.
Turn the rear combination light socket and wire sub-assembly with the tail light bulb in the direction indicated by the arrow shown in the illustration to install them to the rear combination light lens and body as a unit.
81564C
10.INSTALL REAR COMBINATION LIGHT BODY PACKING
Install a new rear combination light body packing.