Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248421 HIGH MOUNTED STOP LIGHT ASSEMBLY G

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  INSPECTION  


PROCEDURE

Hide 81570 1.INSPECT CENTER STOP LIGHT ASSEMBLY

a.
E204112E02
0.197,0.151 0.387,0.324 0.190,0.173 10 *a

Apply battery voltage to the connector and check the center stop light condition.

Text in Illustration
*a Component without harness connected
(Center Stop Light Assembly)

OK:
Measurement Condition Specified Condition
Battery positive (+) → 2 (B)
Battery negative (-) → 1(E)
Center stop light comes on


If the result is not as specified, replace the center stop light assembly.