Home › Vehicle Exterior › LIGHTING (EXT) › HIGH MOUNTED STOP LIGHT ASSEMBLY
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248421 HIGH MOUNTED STOP LIGHT ASSEMBLY A

LIGHTING (EXT)  HIGH MOUNTED STOP LIGHT ASSEMBLY  REMOVAL  


PROCEDURE

Hide 81952D 1.REMOVE REAR LIGHT COVER

a.
E222145

Disengage the 6 claws to remove the rear light cover.


Hide 81570 2.REMOVE CENTER STOP LIGHT ASSEMBLY

a.
E232817

Press up and disengage the 2 claws that are on the side of the clips that is facing towards you.

CAUTION:

Make sure not to cut your fingers or hands on the edge of the back door panel.



b.
E234602E04
0.521,1.271 0.677,1.448 0.156,0.177 10 true A 0.521,0.604 0.677,0.781 0.156,0.177 10 false A 0.948,2.49 1.292,2.646 0.344,0.156 10 false A-A

For the clip on the LH side press up and disengage the claw on the side that is facing away from you.

CAUTION:

Make sure not to cut your fingers or hands on the edge of the back door panel.



c.

For the clip on the RH side press up and disengage the claw on the side that is facing away from you.

CAUTION:

Make sure not to cut your fingers or hands on the edge of the back door panel.



d.

Disconnect the connector to remove the center stop light assembly.


e.
E234603E01
0.908,1.253 1.094,1.415 0.186,0.162 10 *1 1.715,1.355 1.12,1.349 false

Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws to remove the clip.

Text in Illustration
*1 Protective Tape

HINT:

Use the same procedure as for the opposite side.



f.
E234604

Remove the packing.