Home › Vehicle Exterior › LIGHTING (EXT) › STOP LIGHT SWITCH › 2011.08–2017.01
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248424 STOP LIGHT SWITCH G

LIGHTING (EXT)  STOP LIGHT SWITCH  INSPECTION  


PROCEDURE

Hide 84340 1.INSPECT STOP LIGHT SWITCH ASSEMBLY

a.
A161615E03
0.112,0.073 0.278,0.233 0.166,0.160 10 *a 2.27,1.653 2.455,1.822 0.185,0.168 10 *b

Measure the resistance according to the value(s) in the table below.

Text in Illustration
*a Component without harness connected
(Stop Light Switch Assembly)
*b Pushed

Standard Resistance:
Tester Connection Switch Condition Specified Condition
1 - 2 Not pushed Below 1 Ω
Pushed 10 kΩ or higher
3 - 4 Not pushed 10 kΩ or higher
Pushed Below 1 Ω


If the result is not as specified, replace the stop light switch assembly.