Home › Vehicle Exterior › LIGHTING (EXT) › RELAY
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248426 RELAY G

LIGHTING (EXT)  RELAY  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 85926 1.INSPECT HEADLIGHT DIMMER RELAY

a.
E223161

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 4 Battery voltage not applied Below 1 Ω
Battery voltage applied to terminal 1 and 2 10 kΩ or higher
3 - 5 Battery voltage not applied 10 kΩ or higher
Battery voltage applied to terminal 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.


Hide 85916P 2.INSPECT HEADLIGHT RELAY

a.
E209495

Measure the resistance according to the value(s) in the table below.

Standard Resistance:
Tester Connection Condition Specified Condition
3 - 5 Battery voltage not applied 10 kΩ or higher
Battery voltage applied to terminal 1 and 2 Below 1 Ω


If the result is not as specified, replace the relay.