Home › Vehicle Exterior › HORN › HORN › 2011.08–2014.07
RM19S0E _59 Vehicle Exterior _051506 HORN _0248430 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86520 1.INSPECT LOW PITCHED HORN ASSEMBLY

a.
B114453E06
0.586,1.751 0.753,1.903 0.167,0.152 10 *1 1.77,0.099 1.937,0.250 0.167,0.152 10 *2 2.318,1.846 2.422,1.997 0.105,0.152 10 1 1.972,1.395 2.293,1.938 false 0.103,0.09 0.270,0.242 0.167,0.152 10 *a

Check the operation.

Text in Illustration
*1 Battery
*2 Bracket
*a Component without harness connected
(Low Pitched Horn Assembly)

i.

Apply battery voltage to the terminal and the horn bracket, and check that the horn sounds.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Bracket
Low pitched horn sounds


If the result is not as specified, replace the low pitched horn assembly.