Home › Vehicle Exterior › HORN › HORN › 2014.07–2017.01
RM19S0E _59 Vehicle Exterior _051506 HORN _0248430 HORN G

HORN  HORN  INSPECTION  


PROCEDURE

Hide 86510 1.INSPECT HIGH PITCHED HORN ASSEMBLY

a.
B369870E01
2.711,0.225 2.881,0.385 0.170,0.161 10 *1 0.516,1.715 0.686,1.875 0.170,0.161 10 *b 0.081,0.04 0.251,0.200 0.170,0.161 10 *a 1.233,1.783 1.403,1.944 0.170,0.161 10 1 2.677,0.312 2.104,0.261 false 1.369,1.783 1.84,1.355 false 1.349,1.803 1.84,1.355 false

Check the operation.

Text in Illustration
*1 Stay
*a Component without harness connected
(High Pitched Horn Assembly)
*b Battery

i.

Apply battery voltage to the terminal and stay and check that the horn sounds.

OK:
Measurement Condition Specified Condition
Battery positive (+) → Terminal 1
Battery negative (-) → Stay
High pitched horn sounds


If the result is not as specified, replace the high pitched horn assembly.