53395E
1.REMOVE HOOD TO FRONT END PANEL SEAL
Remove the 4 clips.
While peeling off the double-sided adhesive tape, remove the hood to front end panel seal.
53124B
2.REMOVE RADIATOR GRILLE SIDE MOULDING LH
Disengage the 4 claws and remove the radiator grille side moulding.
53123B
3.REMOVE RADIATOR GRILLE SIDE MOULDING RH
Use the same procedure as for the LH side.
53111
4.REMOVE RADIATOR GRILLE
Remove the 3 clips.
Disengage the 14 claws and remove the radiator grille.
75311
5.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Disengage the 4 claws, 2 guides and remove the radiator grill (or front panel) emblem.
52129B
6.REMOVE FRONT BUMPER LOWER COVER
Disengage the 3 claws and remove the front bumper lower cover.
52127C
7.REMOVE FRONT BUMPER HOLE COVER
Disengage the 3 claws and remove the front bumper hole cover.
53112E
8.REMOVE LOWER NO. 1 RADIATOR GRILLE
Disengage the 14 claws and remove the lower No. 1 radiator grille.
81220
9.REMOVE FOG LIGHT ASSEMBLY LH (w/ Fog Light)
81210A
10.REMOVE FOG LIGHT ASSEMBLY RH (w/ Fog Light)
Use the same procedure as for the LH side.
81482C
11.REMOVE FOG LIGHT COVER LH
Disengage the 5 claws and remove the fog light cover.
81481E
12.REMOVE FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81150
13.REMOVE HEADLIGHT ASSEMBLY LH
81110
14.REMOVE HEADLIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52536
15.REMOVE FRONT BUMPER SIDE RETAINER LH
Disengage the 2 claws and remove front bumper side retainer.
52535
16.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
88790B
17.SEPARATE THERMISTOR ASSEMBLY
Disengage the 2 clamps and remove the thermistor.
53286B
18.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Disengage the 2 claws and remove the radiator side air seal.
53285B
19.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/ Energy Absorber)
Use the same procedure as for the No. 2 side.
53286B
20.REMOVE NO. 2 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Disengage the 2 claws and remove the radiator side air seal.
53285B
21.REMOVE NO. 1 RADIATOR SIDE AIR SEAL (w/o Energy Absorber)
Use the same procedure as for the No. 2 side.
53288B
22.REMOVE RADIATOR SUPPORT EXTENSION LH (w/ Energy Absorber)
Disengage the 2 claws and remove the radiator support extension.
53287B
23.REMOVE RADIATOR SUPPORT EXTENSION RH (w/ Energy Absorber)
Use the same procedure as for the LH side.
53288B
24.REMOVE RADIATOR SUPPORT EXTENSION LH (w/o Energy Absorber)
Disengage the 2 claws and remove the radiator support extension.
53287B
25.REMOVE RADIATOR SUPPORT EXTENSION RH (w/o Energy Absorber)
Use the same procedure as for the LH side.
52611
26.REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)
Disengage the 2 guides and remove the front bumper energy absorber.
52131A
27.REMOVE FRONT BUMPER REINFORCEMENT
Disengage the 2 clamps and the disconnect the wire harness.
Remove the 6 bolts.
Remove the 4 nuts and the front bumper reinforcement.
53165A
28.REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET
Remove the 2 nuts and the front No. 1 bumper stone deflector bracket.
Use the same procedure as for the opposite side.
85330
29.SEPARATE WINDSHIELD WASHER JAR ASSEMBLY
Remove the bolt and separate the windshield washer jar.
57014A
30.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
Remove the 4 bolts.
Disengage the 2 guides and remove the front side member bracket.
57013C
31.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
51442C
32.REMOVE ENGINE UNDER COVER LH (w/ Front Bumper Lower Absorber)
51441C
33.REMOVE ENGINE UNDER COVER RH (w/ Front Bumper Lower Absorber)
52601
34.REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY (w/ Front Bumper Lower Absorber)
Remove the 6 screws, 6 clips and grommet.
Disengage the 3 hooks and remove the front bumper energy absorber.