52164A
1.REMOVE REAR BUMPER PLATE LH
Remove the 2 nuts.
Disengage the 2 claws and remove the rear bumper plate.
52163A
2.REMOVE REAR BUMPER PLATE RH
Use the same procedure as for the LH side.
52451
3.REMOVE REAR BUMPER GUARD
Remove the 2 clips.
Disengage the 8 claws and remove the rear bumper guard.
Disengage the claw and remove the outside moulding retainer.
Use the same procedure as for the opposite side.
52592
4.REMOVE REAR BUMPER SIDE SEAL LH
Remove the 2 clips and the rear bumper side seal.
52591
5.REMOVE REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52576
6.REMOVE REAR BUMPER SIDE RETAINER LH
Remove the screw.
Disengage the 2 claws and guide and remove the rear bumper side retainer.
52575
7.REMOVE REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52156A
8.REMOVE REAR BUMPER SIDE SUPPORT LH
Remove the screw.
Disengage the 2 claws and remove the rear bumper side support.
52155A
9.REMOVE REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52171A
10.REMOVE REAR NO. 1 BUMPER REINFORCEMENT
Remove the 6 bolts and the rear bumper reinforcement.
52172B
11.REMOVE REAR NO. 2 BUMPER REINFORCEMENT
Disengage the 2 guides and remove the rear bumper reinforcement.