52172B
1.INSTALL REAR NO. 2 BUMPER REINFORCEMENT
Engage the 2 guides and install the rear bumper reinforcement.
52171A
2.INSTALL REAR NO. 1 BUMPER REINFORCEMENT
Install the rear bumper reinforcement with the 6 bolts.
52156A
3.INSTALL REAR BUMPER SIDE SUPPORT LH
Engage the 2 claws and install the rear bumper side support.
Tighten the screw.
52155A
4.INSTALL REAR BUMPER SIDE SUPPORT RH
Use the same procedure as for the LH side.
52576
5.INSTALL REAR BUMPER SIDE RETAINER LH
Engage the guide and, 2 claws and install the rear bumper side retainer.
Tighten the screw.
52575
6.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52592
7.INSTALL REAR BUMPER SIDE SEAL LH
Install the rear bumper side seal with the 2 clips.
52591
8.INSTALL REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.
52451
9.INSTALL REAR BUMPER GUARD
Engage the 8 claws and install the rear bumper guard.
Install the 2 clips.
Engage the claw and install the outside moulding retainer.
Use the same procedure as for the opposite side.
52164A
10.INSTALL REAR BUMPER PLATE LH
Engage the 2 claws and install the rear bumper plate.
Tighten the 2 nuts.
52163A
11.INSTALL REAR BUMPER PLATE RH
Use the same procedure as for the LH side.