53395E
1.REMOVE HOOD TO FRONT END PANEL SEAL
Remove the 4 clips.
While peeling off the double-sided adhesive tape, remove the hood to front end panel seal.
53111
2.REMOVE RADIATOR GRILLE
Remove the 3 clips.
Disengage the 12 claws, guide and remove the radiator grille.
75311
3.REMOVE RADIATOR GRILLE (OR FRONT PANEL) EMBLEM
Disengage the 4 claws, 2 guides and remove the radiator grill (or front panel) emblem.
52129B
4.REMOVE FRONT BUMPER LOWER COVER
Disengage the 2 claws and remove the front bumper lower cover.
53112E
5.REMOVE LOWER NO. 1 RADIATOR GRILLE
Remove the 2 screws.
Disengage the 14 claws and remove the lower No. 1 radiator grille.
53122E
6.REMOVE RADIATOR GRILLE LOWER MOULDING
Remove the 6 screws.
Disengage the 5 claws and remove the radiator grille lower moulding.
81220
7.REMOVE FOG LIGHT ASSEMBLY LH
81210A
8.REMOVE FOG LIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
81482C
9.REMOVE FOG LIGHT COVER LH
Disengage the 5 claws and remove the fog light cover.
81481E
10.REMOVE FOG LIGHT COVER RH
Use the same procedure as for the LH side.
81150
11.REMOVE HEADLIGHT ASSEMBLY LH
81110
12.REMOVE HEADLIGHT ASSEMBLY RH
Use the same procedure as for the LH side.
52536
13.REMOVE FRONT BUMPER SIDE RETAINER LH
Disengage the 2 claws and remove the front bumper side retainer.
52535
14.REMOVE FRONT BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
88790B
15.SEPARATE THERMISTOR ASSEMBLY
Disengage the 2 clamps and remove the thermistor.
53288B
16.REMOVE RADIATOR SUPPORT EXTENSION LH
Disengage the 2 claws and remove the radiator support extension.
53287B
17.REMOVE RADIATOR SUPPORT EXTENSION RH
Use the same procedure as for the LH side.
53286B
18.REMOVE NO. 2 RADIATOR SIDE AIR SEAL
Disengage the 2 claws and remove the radiator side air seal.
53285B
19.REMOVE NO. 1 RADIATOR SIDE AIR SEAL
Use the same procedure as for the No. 2 side.
52611
20.REMOVE FRONT BUMPER ENERGY ABSORBER (w/ Energy Absorber)
Disengage the 2 guides and remove the front bumper energy absorber.
52131A
21.REMOVE FRONT BUMPER REINFORCEMENT
Disengage the 2 clamps and disconnect the wire harness.
Remove the 6 bolts.
Remove the 4 nuts and the front bumper reinforcement.
53165A
22.REMOVE FRONT NO. 1 BUMPER STONE DEFLECTOR BRACKET
Remove the 2 nuts and the front No. 1 bumper stone deflector bracket.
Use the same procedure as for the opposite side.
85330
23.SEPARATE WINDSHIELD WASHER JAR ASSEMBLY
Remove the bolt and separate the windshield washer jar.
57014A
24.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY LH
Remove the 4 bolts.
Disengage the 2 guides and remove the front side member bracket.
57013C
25.REMOVE FRONT SIDE MEMBER BRACKET SUB-ASSEMBLY RH
Use the same procedure as for the LH side.
51442C
26.REMOVE ENGINE UNDER COVER LH (w/ Front Bumper Lower Absorber)
51441C
27.REMOVE ENGINE UNDER COVER RH (w/ Front Bumper Lower Absorber)
52601
28.REMOVE FRONT BUMPER ENERGY ABSORBER SUB-ASSEMBLY (w/ Front Bumper Lower Absorber)
Remove the 6 screws, 6 clips and grommet.
Disengage the 3 hooks and remove the front bumper energy absorber.