Use the same procedure for the RH and LH sides.
The procedure described below is for the LH side.
87940
1.REMOVE OUTER REAR VIEW MIRROR ASSEMBLY
75756C
2.REMOVE FRONT DOOR WINDOW FRAME REAR MOULDING (for 3 Door)
68210C
3.REMOVE FRONT DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY
Apply protective tape to the door panel in the area around the front door glass outer weatherstrip.
| *1 | Protective Tape |
Using a moulding remover, disengage the 6 claws and remove the front door glass outer weatherstrip.
| *1 | Moulding Remover |