Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING(for Front Side)
RM19S0E _59 Vehicle Exterior _051507 EXTERIOR PANELS / TRIM _0248443 FRONT DOOR WINDOW FRAME MOULDING(for Front Side) A

EXTERIOR PANELS / TRIM  FRONT DOOR WINDOW FRAME MOULDING(for Front Side)  INSTALLATION  


PROCEDURE

Hide 75752C 1.INSTALL FRONT DOOR WINDOW FRAME FRONT MOULDING

a.

Clean the attachment surface.

i.

Using an infrared light, heat the adhesive remaining on the body.

Heating Temperature
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)

CAUTION:

Do not burn yourself on the hot body panel or with the infrared light.


NOTICE:

Do not heat the vehicle body excessively.



ii.

Using a piece of cloth, rub the remaining adhesive off the body.


iii.

Using a non-residue solvent, clean the attachment surface.



b.

Remove the release paper from the front door window frame front moulding.


c.

Engage the 2 guides, claw and install a new front door window frame front moulding.

NOTICE:

Thoroughly press the front door window frame front moulding to ensure that it adheres.