Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROOF DRIP SIDE FINISH MOULDING
RM19S0E _59 Vehicle Exterior _051507 EXTERIOR PANELS / TRIM _0248445 ROOF DRIP SIDE FINISH MOULDING A

EXTERIOR PANELS / TRIM  ROOF DRIP SIDE FINISH MOULDING  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure described below is for the LH side.



PROCEDURE

Hide 75552 1.REMOVE ROOF DRIP SIDE FINISH MOULDING

a.
B272518E04
0.635,1.583 0.979,1.76 false 0.229,1.24 0.552,1.406 false 0.052,1.146 0.25,1.354 0.198,0.208 10 true *1 1,1.698 1.229,1.875 0.229,0.177 10 true *1

Apply protective tape as shown in the illustration.

Text in Illustration
*1 Protective Tape


b.
B272519

Disengage the 2 clips and remove the roof drip side finish moulding.

NOTICE:
·

Do not remove the clips.

·

Replace the clips with supply clips if damaged.