Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE(for Rear Door)
RM19S0E _59 Vehicle Exterior _051507 EXTERIOR PANELS / TRIM _0248450 BLACK OUT TAPE(for Rear Door) A

EXTERIOR PANELS / TRIM  BLACK OUT TAPE(for Rear Door)  INSTALLATION  


PROCEDURE

Hide 75924 1.INSTALL NO. 2 BLACK OUT TAPE


b.

Clean the attachment surface (using an infrared light) (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>BLACK OUT TAPE(for Front Door)>INSTALLATION).


c.

Clean the attachment surface (using a tape removal disc) (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>BLACK OUT TAPE(for Front Door)>INSTALLATION).


d.

Apply new outer front black out tape to the positions shown in the illustration.

B272534E01
1.832,1.665 1.981,1.851 0.149,0.186 10 A 0.898,1.665 1.047,1.851 0.149,0.186 10 A 4.202,0.542 4.537,0.708 0.335,0.166 10 A-A 4.375,1.462 4.546,1.628 0.170,0.166 10 a 6.989,1.071 7.147,1.237 0.159,0.166 10 b

Standard Measurement:
Dimension Measurement
a 2.0 to 4.0 mm (0.079 to 0.157 in.)
b 3.0 to 5.0 mm (0.118 to 0.197 in.)



Hide 68230C 2.INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY