Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › BLACK OUT TAPE(for Center Pillar)
RM19S0E _59 Vehicle Exterior _051507 EXTERIOR PANELS / TRIM _0248451 BLACK OUT TAPE(for Center Pillar) A

EXTERIOR PANELS / TRIM  BLACK OUT TAPE(for Center Pillar)  INSTALLATION  


PROCEDURE

Hide 75926B 1.INSTALL NO. 3 BLACK OUT TAPE


b.

Clean the attachment surface (using an infrared light) (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>BLACK OUT TAPE(for Front Door)>INSTALLATION).


c.

Clean the attachment surface (using a tape removal disc) (See page Vehicle Exterior>EXTERIOR PANELS / TRIM>BLACK OUT TAPE(for Front Door)>INSTALLATION).


d.

Apply new outer front black out tape to the positions shown in the illustration.

B273662E01
1.651,2.05 1.810,2.244 0.159,0.194 10 A 0.56,2.05 0.720,2.244 0.159,0.194 10 A 1.719,0.186 1.878,0.380 0.159,0.194 10 B 1.633,0.99 1.793,1.184 0.159,0.194 10 B 4.104,0.256 4.431,0.445 0.327,0.189 10 A-A 4.104,1.762 4.475,1.951 0.371,0.189 10 B-B 6.201,0.39 6.400,0.579 0.199,0.189 10 a 5.007,2.3 5.206,2.489 0.199,0.189 10 b 6.503,0.62 6.976,0.776 0.473,0.157 10 R End 6.109,0.811 6.484,0.697 false 4.02,2.266 4.493,2.422 0.473,0.157 10 R End 4.725,2.506 4.431,2.343 false

Standard Measurement:
Dimension Measurement
a 2.0 to 4.0 mm (0.079 to 0.157 in.)
b 5.0 to 7.0 mm (0.197 to 0.276 in.)