Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › FRONT DOOR WINDOW FRAME MOULDING(for Center)
RM19S0E _59 Vehicle Exterior _051507 EXTERIOR PANELS / TRIM _0248453 FRONT DOOR WINDOW FRAME MOULDING(for Center) A

EXTERIOR PANELS / TRIM  FRONT DOOR WINDOW FRAME MOULDING(for Center)  INSTALLATION  


PROCEDURE

Hide 75754A 1.INSTALL FRONT DOOR WINDOW FRAME UPPER MOULDING

a.

Clean the attachment surface.

i.

Using an infrared light, heat the adhesive remaining on the body.

Heating Temperature:
Item Temperature
Vehicle Body 40 to 60°C (104 to 140°F)


CAUTION:

Do not burn yourself with the heated body or infrared light.


NOTICE:

Do not heat the vehicle body excessively.



ii.

Using a piece of cloth, rub the remaining adhesive off the front door front lower frame.


iii.

Using a non-residue solvent, clean the attachment surface.



b.

Remove the release paper from the front door window frame upper moulding.


c.

Engage the 3 guides and install a new front door window frame upper moulding.

Text in Illustration
*1 Double-sided tape

NOTICE:

Thoroughly press the front door window frame upper moulding to ensure that it adheres.