1.INSTALL FRONT BUMPER ASSEMBLY
Install the 2 nuts.
Install the 3 grommets.
w/ Fog Light:
Connect the 2 connectors.
Engage the 7 claws to install the front bumper assembly.
Use the same procedure as for the opposite.
w/o Fog Light:
Engage the 7 claws to install the front bumper assembly.
Use the same procedure as for the opposite.
Install the 5 screws and 3 bolts.
Install the 4 clips.
Remove the protective tape.
2.ADJUST HEADLIGHT AIMING
3.ADJUST FOG LIGHT AIMING