Home › Engine / Hybrid System › CRUISE CONTROL › CRUISE CONTROL SYSTEM › from 2016.09
RM19S0E _51 Engine / Hybrid System _051464 CRUISE CONTROL _0248153 CRUISE CONTROL SYSTEM U

CRUISE CONTROL  CRUISE CONTROL SYSTEM  TERMINALS OF ECM  


CHECK ECM


C360795E01
2.396,0.438 2.854,0.635 0.458,0.198 10 false B89 5.896,0.438 6.354,0.635 0.458,0.198 10 false A83

a.

Measure the voltage and resistance according to the value(s) in the table below.

Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A83-1 (BATT) - B89-16 (E1) Y - W-B Power source circuit Always 11 to 14 V
A83-37 (IGSW) - B89-16 (E1) R - W-B IG power source circuit Ignition switch ON 11 to 14 V
Ignition switch off Below 1 V
A83-9 (STP) - B89-16 (E1) G - W-B Stop light switch signal circuit Brake pedal depressed 11 to 14 V
Brake pedal released Below 1 V
A83-10 (ST1-) - B89-16 (E1) Y - W-B Stop light switch signal circuit Ignition switch ON, brake pedal released 11 to 14 V
Ignition switch ON, brake pedal depressed Below 1 V
A83-60 (CCS) - B89-16 (E1) G - W-B Cruise control main switch circuit Cruise control main switch on Below 2.5 Ω
Cruise control main switch off 1 MΩ or higher
+RES switch held on 235 to 245 Ω
-SET switch held on 617 to 643 Ω
CANCEL switch held on 1509 to 1571 Ω
B89-81 (D) - B89-16 (E1)*1 L - W-B Park/neutral position switch signal Ignition switch ON, shift lever in D 11 to 14 V
Ignition switch ON, shift lever not in D Below 1 V
B89-81 (D) - B89-16 (E1)*2 L - W-B Clutch switch signal Ignition switch ON, clutch pedal depressed 11 to 14 V
Ignition switch ON, clutch pedal released Below 1 V
B89-16 (E1) - Body ground W-B - Body ground Ground Always Below 1 Ω

*1: for Automatic Transaxle

*2: for Manual Transaxle