Home › Drivetrain › U441E (AUTOMATIC TRANSMISSION / TRANSAXLE) › AUTOMATIC TRANSAXLE SYSTEM › from 2016.09
RM19S0E _52 Drivetrain _051466 U441E AUTOMATIC TRANSMISSION / TRANSAXLE _0248170 AUTOMATIC TRANSAXLE SYSTEM U

U441E AUTOMATIC TRANSMISSION / TRANSAXLE  AUTOMATIC TRANSAXLE SYSTEM  TERMINALS OF ECM  


ECM


U134138E05
2.385,0.438 2.688,0.594 0.302,0.156 10 false B89 5.885,0.438 6.229,0.594 0.344,0.156 10 false A83

HINT:

The standard voltage and resistance of each ECM terminal is shown in the table below.

In the table, first follow the information under "Condition". Look under "Terminal No. (Symbol) " for the terminals to be inspected. The standard voltage and resistance between the terminals is shown under "Specific Condition".

Use the illustration above as a reference for the ECM terminals.


Terminals No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
A83-3 (+B2) - B89-16 (E1) B - W-B Power source of ECM Ignition switch ON 11 to 14 V
A83-2 (+B) - B89-16 (E1) B - W-B Power source of ECM Ignition switch ON 11 to 14 V
A83-1 (BATT) - B89-16 (E1) Y - W-B Battery (for measuring battery voltage and for ECM memory) Always 11 to 14 V
A83-58 (3) - B89-16 (E1) BE - W-B 3 shift position switch signal Ignition switch ON and shift lever in 3 11 to 14 V
Ignition switch ON and shift lever not in 3 Below 1 V
A83-13 (CANH) - B89-16 (E1) L - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 1)
A83-26 (CANL) - B89-16 (E1) W - W-B CAN communication line Ignition switch ON Pulse generation
(See waveform 2)
B89-16 (E1) - Body ground W-B Ground Always Below 1 Ω
B89-63 (NSW) - B89-16 (E1) BE - W-B Park/Neutral position switch signal Ignition switch ON and shift lever in P or N Below 1 V
Ignition switch ON and shift lever not in P and N 11 to 14 V
B89-79 (R) - B89-16 (E1) R - W-B R shift position switch signal Ignition switch ON and shift lever in R 11 to 14 V
Ignition switch ON and shift lever not in R Below 1 V
B89-97 (N) - B89-16 (E1) V - W-B N shift position switch signal Ignition switch ON and shift lever in N 11 to 14 V
Ignition switch ON and shift lever not in N Below 1 V
B89-131 (2) - B89-16 (E1) LG - W-B 2 shift position switch signal Ignition switch ON and shift lever in 2 11 to 14 V
Ignition switch ON and shift lever not in 2 Below 1 V
B89-81 (D) - B89-16 (E1) L - W-B D shift position switch signal Ignition switch ON and shift lever in D or 3 11 to 14 V
Ignition switch ON and shift lever not in D and 3 Below 1 V
B89-68 (SL) - B89-16 (E1) P - W-B SL solenoid signal Ignition switch ON Below 1 V
Vehicle driving under lock up range 11 to 14 V
B89-95 (THO1) - B89-96 (ETHO) Y - B ATF (Automatic Transmission Fluid) temperature sensor signal ATF temperature: 10°C
(50°F) to 145°C (293°F)
4 to 0 V
B89-99 (P) - B89-16 (E1) P - W-B P shift position switch signal Ignition switch ON and shift lever in P 11 to 14 V
Ignition switch ON and shift lever not in P Below 1 V
B89-98 (L) - B89-16 (E1) V - W-B L shift position switch signal Ignition switch ON and shift lever in L 11 to 14 V
Ignition switch ON and shift lever not in L Below 1 V
B89-73 (SLT+) - B89-72 (SLT-) P - L Shift solenoid valve SLT signal Engine idling speed Pulse generation
B89-69 (S2) - B89-16 (E1) L - W-B Shift solenoid valve S2 signal Ignition switch ON Below 1 V
1st or 4th gear 11 to 14 V
2nd or 3rd gear Below 1 V
B89-70 (S1) - B89-16 (E1) R - W-B Shift solenoid valve S1 signal Ignition switch ON 11 to 14 V
1st or 2nd gear 11 to 14 V
3rd or 4th gear Below 1 V
B89-71 (ST) - B89-16 (E1) GR - W-B Shift solenoid valve ST signal Shift lever in D (3rd gear ←→ 4th gear) Below 1 V ←→ 11 to 14 V
B89-127 (NT+) - B89-128 (NT-) L - G Transmission revolution sensor (NT) signal Driving at approximately 20 km/h (12 mph) Pulse generation
(See waveform 3)

a.
C193943E02
2.797,1.44 3.142,1.588 0.345,0.147 10 GND

Waveform 1

Terminal CANH - E1
Tool setting 1 V/DIV, 10 μs/DIV
Vehicle conditions Ignition switch ON


b.
C193942E02
2.783,1.401 3.112,1.558 0.329,0.157 10 GND

Waveform 2

Terminal CANL - E1
Tool setting 1 V/DIV, 10 μs/DIV
Vehicle conditions Ignition switch ON


c.
C355225E01
2.813,0.99 3.167,1.177 0.354,0.188 10 false GND

Waveform 3

Terminal NT+ - NT-
Tool setting 2 V/DIV, 1 ms/DIV
Vehicle conditions Driving at approximately 20 km/h (12 mph)