Home › Engine / Hybrid System › 1NZ-FE INTAKE / EXHAUST › EXHAUST PIPE › from 2016.09
RM19S0E _51 Engine / Hybrid System _051456 1NZ-FE INTAKE / EXHAUST _0248114 EXHAUST PIPE A

1NZ-FE INTAKE / EXHAUST  EXHAUST PIPE  REMOVAL  


PROCEDURE

Hide 89465A 1.REMOVE HEATED OXYGEN SENSOR

Hide 57533B 2.REMOVE FRONT FLOOR CENTER BRACE (w/ Side Mudguard)

Hide 17430 3.REMOVE TAIL EXHAUST PIPE ASSEMBLY

a.
A247550

Remove the 2 bolts and 2 springs, and separate the tail exhaust pipe assembly from the front exhaust pipe assembly.


b.

Remove the 2 exhaust pipe supports and the tail exhaust pipe assembly.


c.

Remove the gasket from the front exhaust pipe assembly.


Hide 17451A 4.REMOVE NO. 2 EXHAUST PIPE GASKET

Hide 17410 5.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A247548

Remove the 2 bolts and 2 springs, and separate the front exhaust pipe assembly from the exhaust manifold.


b.

Remove the 3 exhaust pipe supports and the front exhaust pipe assembly.


c.

Remove the gasket from the exhaust manifold.


Hide 17451 6.INSTALL EXHAUST PIPE GASKET

Hide 17408 7.REMOVE TAIL EXHAUST PIPE BAFFLE SUB-ASSEMBLY (w/ Side Mudguard)

a.
A171266E01
0.908,0.125 1.134,0.325 0.226,0.200 10 *1 1.086,0.208 1.547,0.4 false

Using a plastic hammer, uniformly tap out and remove the tail exhaust pipe baffle sub-assembly.

Text in Illustration
*1 Plastic Hammer