Home › Engine / Hybrid System › 1NZ-FE INTAKE / EXHAUST › INTAKE SYSTEM › from 2016.09
RM19S0E _51 Engine / Hybrid System _051456 1NZ-FE INTAKE / EXHAUST _0248111 INTAKE SYSTEM G

1NZ-FE INTAKE / EXHAUST  INTAKE SYSTEM  ON-VEHICLE INSPECTION  


PROCEDURE

Hide 1.INSPECT INTAKE SYSTEM

HINT:

Perform "Inspection After Repairs" after repairing or replacing the intake system.

Click hereEngine / Hybrid System>1NZ-FE ENGINE CONTROL>1NZ-FE SFI SYSTEM>INITIALIZATION


a.

Check that there is no air suction at the points shown in the illustration.

A250623


Hide 2.PERFORM INITIALIZATION

a.

Perform "Inspection After Repairs" after repairing or replacing the intake system.

Click hereEngine / Hybrid System>1NZ-FE ENGINE CONTROL>1NZ-FE SFI SYSTEM>INITIALIZATION