Home › Vehicle Interior › PRE-CRASH SAFETY › PRE-CRASH SAFETY SYSTEM › from 2017.01
RM19S0E _58 Vehicle Interior _063185 PRE-CRASH SAFETY _0307822 PRE-CRASH SAFETY SYSTEM D

PRE-CRASH SAFETY  PRE-CRASH SAFETY SYSTEM  DIAGNOSIS SYSTEM  



FUNCTION OF WARNING INDICATOR


a.

If the pre-crash safety system is not functioning properly, the driver is warned by the PCS warning light (PCS OFF indicator) in the combination meter assembly.

PCS Warning light (PCS OFF Indicator) Detail DTC
Blinking The PCS warning light (PCS OFF indicator) blinks when the pre-crash safety city sensor detects a system malfunction. DTC stored


b.

Initial check

i.

The initial check occurs when the ignition switch is off for more than 2 seconds, and then turned ON. The initial check consists of a pre-crash safety system diagnostic check with a duration of approximately 5 seconds.


ii.

If the initial check discovers a malfunction, 5 seconds after the initial check is complete, the PCS warning light (PCS OFF indicator) blinks.



c.

Constant check

i.

The pre-crash safety city sensor constantly monitors the pre-crash safety system for malfunctions after the ignition switch is turned to ON and the initial check (approximately 5 seconds) has completed.