Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › from 2017.01
RM19S0E _51 Engine / Hybrid System _051464 CRUISE CONTROL _0307843 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  DIAGNOSIS SYSTEM  


HINT:

The lane departure alert system operates using systems shared with the pre-crash safety system. When a malfunction is detected in the pre-crash safety system, a malfunction also occurs in the lane departure alert system.


INITIAL CHECK


a.

Turn the ignition switch off. Wait for at least 2 seconds, and then turn the ignition switch to ON. Lane departure alert system diagnosis is performed for approximately 5 seconds.


b.

If the initial check discovers a malfunction, the LDA indicator (yellow) in the combination meter assembly illuminates 5 seconds after the initial check is complete.

HINT:
A349199E01
0.085,0 0.454,0.179 0.369,0.179 10 *a

The LDA indicator (yellow) illuminates when a malfunction in the lane departure alert system is detected and a DTC is output.

Text in Illustration
*a Lane Departure Alert Indicator Light (Yellow)