Home › Engine / Hybrid System › CRUISE CONTROL › LANE DEPARTURE ALERT SYSTEM › 2017.01–2018.06
RM19S0E _51 Engine / Hybrid System _051464 CRUISE CONTROL _0307843 LANE DEPARTURE ALERT SYSTEM D

CRUISE CONTROL  LANE DEPARTURE ALERT SYSTEM  FREEZE FRAME DATA  


FREEZE FRAME DATA


a.

Whenever a PCS DTC is detected, the pre-crash safety city sensor stores the current vehicle (ECU or sensor) state as Freeze Frame Data.



CHECK FREEZE FRAME DATA


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch to ON.


c.

Turn the GTS on.


d.

Enter the following menus: Chassis / PCS/LDA/RSA/LVN /Trouble Codes.


e.

According to the GTS display, select a DTC that stored freeze frame data.


f.

Read the freeze frame data recorded when the DTC was stored.

PCS/LDA/RSA/LVN
Tester Display Measurement Item/Range Normal Condition Diagnostic Note
Lidar Detect Target Distance Displays distance of the highest priority object which is detected by laser radar / 0 to 51.0 m Distance between the vehicle and a preceding vehicle
·

When no preceding vehicle is detected, "0 m" (0 ft.) is displayed

·

Displays the distance between the pre-crash safety city sensor (laser sensor) and a preceding vehicle.


Headlight Type Displays headlight type / Halogen or LED Halogen: Vehicle equipped with halogen headlights
LED: Vehicle equipped with LED headlights
-
Skid Control Buzzer Demand Displays lane departure alert buzzer condition / ON or OFF ON: Lane departure alert buzzer active
OFF: Lane departure alert buzzer inactive
Buzzer request when lane departure alert system enabled and vehicle deviated from white line
History of Blockage Displays whether there is pre-crash safety city sensor obstruction history / ON or OFF ON: Pre-crash safety city sensor (camera and laser radar) obstruction history exists
OFF: Pre-crash safety city sensor (camera and laser radar) obstruction history does not exist
-
History of Low Voltage Displays whether there is low voltage history / ON or OFF ON: Pre-crash safety city sensor low voltage history exists
OFF: Pre-crash safety city sensor low voltage history does not exist
-
History of High Voltage Displays whether there is high voltage history / ON or OFF ON: Pre-crash safety city sensor high voltage history exists
OFF: Pre-crash safety city sensor high voltage history does not exist
-
History of Low Temperature Displays whether there is low temperature history / ON or OFF ON: Pre-crash safety city sensor low temperature history exists
OFF: Pre-crash safety city sensor low temperature history does not exist
-
History of High Temperature Displays whether there is high temperature history / ON or OFF ON: Pre-crash safety city sensor high temperature history exists
OFF: Pre-crash safety city sensor high temperature history does not exist
-
Blockage Status Displays whether there is a camera obstruction malfunction / ON or OFF ON: Pre-crash safety city sensor (camera) obstructed
OFF: Pre-crash safety city sensor (camera) not obstructed
-
Low Voltage Status Displays whether there is a low voltage malfunction / ON or OFF ON: Pre-crash safety city sensor low voltage malfunction exists
OFF: Pre-crash safety city sensor low voltage malfunction does not exist
-
High Voltage Status Displays whether there is a high voltage malfunction / ON or OFF ON: Pre-crash safety city sensor high voltage malfunction exists
OFF: Pre-crash safety city sensor high voltage malfunction does not exist
-
Low Temperature Status Displays whether there is a low temperature malfunction / ON or OFF ON: Pre-crash safety city sensor low temperature malfunction exists
OFF: Pre-crash safety city sensor low temperature malfunction does not exist
-
High Temperature Status Displays whether there is a high temperature malfunction / ON or OFF ON: Pre-crash safety city sensor high temperature malfunction exists
OFF: Pre-crash safety city sensor high temperature malfunction does not exist
-
Lidar Blockage Status Displays whether laser radar is dirty / ON or OFF ON: Dirt on pre-crash safety city sensor (laser radar)
OFF: No dirt on pre-crash safety city sensor (laser radar)
-
Control Mode Displays ECU control mode status / Normal or Check Mode Normal: Normal operation
Check: Operating in Control Mode
-
PCS Operation State Retention Setting Displays the setting of the PCS Operation State Retention Setting customize setting / ON or OFF ON: PCS Operation State Retention Setting customize setting is set to ON
OFF: PCS Operation State Retention Setting customize setting is set to OFF
-
PCS Alarm Activation Distance Retention Setting 1 Displays the setting of the PCS Alarm Activation Distance Retention Setting 1 customize setting / ON or OFF ON: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to OFF
-
PCS Alarm Activation Distance Retention Setting 2 Displays the setting of the PCS Alarm Activation Distance Retention Setting 2 customize setting / ON or OFF ON: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to OFF
-
PCS Alarm Activation Distance Retention Setting 3 Displays the setting of the PCS Alarm Activation Distance Retention Setting 3 customize setting/ ON or OFF ON: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to OFF
-