Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2017.01
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0309752 AUTOMATIC HIGH BEAM SYSTEM D

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  DTC CHECK / CLEAR  


CHECK DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.


e.

Check for DTCs.

NOTICE:

Check for DTCs with the ignition switch turned to ON.


HINT:
·

If DTCs are displayed, refer to the Diagnostic Trouble Code Chart.

Click hereVehicle Exterior>LIGHTING (EXT)>AUTOMATIC HIGH BEAM SYSTEM>DIAGNOSTIC TROUBLE CODE CHART

·

Check for DTCs again after repairs, and ensure that no DTCs are output.





CLEAR DTC


a.

Connect the GTS to the DLC3.


b.

Turn the ignition switch ON.


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Main Body / Trouble Codes.


e.

Clear the DTCs.