Home › Vehicle Exterior › LIGHTING (EXT) › AUTOMATIC HIGH BEAM SYSTEM › from 2017.01
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0309752 AUTOMATIC HIGH BEAM SYSTEM U

LIGHTING (EXT)  AUTOMATIC HIGH BEAM SYSTEM  FAIL-SAFE CHART  


AUTOMATIC HIGH BEAM SYSTEM


a.

The automatic high beam system stops automatic high beam system control when the following malfunctions are detected.

Item Malfunction Detection Condition Recovery Conditions
Wheel speed sensor Wheel speed sensor malfunction Normal signal received
CAN communication CAN communication malfunction signal received Normal signal received
Airbag ECU assembly (Yaw rate sensor) Yaw rate sensor malfunction Normal signal received
Pre-crash safety city sensor Pre-crash safety city sensor malfunction Normal signal received