81560
1.INSPECT REAR COMBINATION LIGHT ASSEMBLY LH
| *a | Front view of wire harness connector
(to Rear Combination Light Assembly LH) |
Apply battery voltage to the rear combination light assembly LH and check that the lights come on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4 (B)
Battery negative (-) → Terminal 3 (E) |
Stop light comes on |
| Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 3 (E) |
Taillight comes on |
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 3 (E) |
Rear turn signal light comes on |
If the result is not as specified, replace the rear combination light assembly LH.
81550
2.INSPECT REAR COMBINATION LIGHT ASSEMBLY RH
| *a | Front view of wire harness connector
(to Rear Combination Light Assembly RH) |
Apply battery voltage to the rear combination light assembly RH and check that the lights come on.
| Condition | Specified Condition |
|---|---|
| Battery positive (+) → Terminal 4 (B)
Battery negative (-) → Terminal 3 (E) |
Stop light comes on |
| Battery positive (+) → Terminal 2 (B)
Battery negative (-) → Terminal 3 (E) |
Taillight comes on |
| Battery positive (+) → Terminal 1 (B)
Battery negative (-) → Terminal 3 (E) |
Rear turn signal light comes on |
If the result is not as specified, replace the rear combination light assembly RH.