Home › Vehicle Exterior › LIGHTING (EXT) › REAR COMBINATION LIGHT ASSEMBLY › from 2017.01
RM19S0E _59 Vehicle Exterior _051505 LIGHTING (EXT) _0248419 REAR COMBINATION LIGHT ASSEMBLY A

LIGHTING (EXT)  REAR COMBINATION LIGHT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 81496C 1.INSTALL NO. 2 REAR COMBINATION LIGHT GUIDE

a.

Install a new 2 No. 2 rear combination light guides to the body.


Hide 81560 2.INSTALL REAR COMBINATION LIGHT ASSEMBLY

a.

Install the rear bumper side support with the 2 screw.


b.

Engage the 2 pins and 3 clips to install the rear combination light assembly with the rear bumper side support.


c.

Install the screw.


d.

Install the 2 nuts.

Torque:
5.4 N*m (55 kgf*cm, 48 in.*lbf)


e.

Connect the connector.


Hide 64746 3.INSTALL REAR COMBINATION LIGHT SERVICE COVER

a.

Engage the 2 guides.


b.

Engage the 4 claws to install the rear combination light service cover.


Hide 52159 4.INSTALL REAR BUMPER COVER