Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR(for 1NZ-FE, 2NZ-FE) › from 2017.01
RM19S0E _58 Vehicle Interior _051498 HEATING / AIR CONDITIONING _0248359 COMPRESSOR(for 1NZ-FE, 2NZ-FE) A

HEATING / AIR CONDITIONING  COMPRESSOR(for 1NZ-FE, 2NZ-FE)  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

Hide 16361A 2.REMOVE FAN AND GENERATOR V BELT

Hide 51441C 3.REMOVE ENGINE UNDER COVER RH

Hide 88704 4.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
I113095

Remove the bolt and disconnect the suction hose from the compressor.


b.

Remove the O-ring from the suction hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88711 5.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
I113097

Remove the bolt and disconnect the discharge hose from the compressor.


b.

Remove the O-ring from the discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88310 6.REMOVE COMPRESSOR WITH PULLEY ASSEMBLY

a.

Disconnect the connector.


b.
I113099

Remove the 4 bolts and the compressor.