75741E
1.REMOVE SYMBOL EMBLEM
| *a | Locating Pin |
|
Protective Tape |
Apply protective tape to the back door outside garnish in the area around the symbol emblem.
Using a heat light, heat the symbol emblem.
| Item | Temperature |
|---|---|
| Symbol Emblem | 40 to 60°C (104 to 140°F)
3 to 5 minutes |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Using a moulding remover D, separate the double-sided tape and disengage the pins to remove the symbol emblem.
Be careful of the position of the locating pins.
Be careful not to damage the back door outside garnish.
Remove the protective tape.
75442
2.REMOVE NO. 2 LUGGAGE COMPARTMENT DOOR NAME PLATE
| *a | Wooden Blocks |
| *b | Piano Wire |
|
Protective Tape |
Apply protective tape to the back door panel in the area around the No. 2 luggage compartment door name plate.
Using a heat light, heat the No. 2 luggage compartment door name plate.
| Item | Temperature |
|---|---|
| No. 2 Luggage Compartment Door Name Plate | 40 to 60°C (104 to 140°F)
3 to 5 minutes |
Do not touch the heat light and heated parts, touching the heat light may result in burns.
Touching heated parts for a long time may result in burns.
Pass a piano wire between the vehicle body and No. 2 luggage compartment door name plate.
Tie objects that can serve as handles (for example, wooden blocks) to both wire ends.
Be careful not to damage the vehicle body.
Pull the piano wire and scrape off the double-sided tape that holds the No. 2 luggage compartment door name plate to the vehicle body.
Remove the No. 2 luggage compartment door name plate.
Remove the protective tape.