52172B
1.INSTALL NO.2 REAR BUMPER REINFORCEMENT
Engage the 2 guides to install the No. 2 rear bumper reinforcement.
52179C
2.INSTALL NO. 2 REAR BUMPER REINFORCEMENT PLATE (for Type A)
Install the No. 2 rear bumper reinforcement plate with the 3 bolts.
52178B
3.INSTALL NO. 1 REAR BUMPER REINFORCEMENT PLATE (for Type A)
Use the same procedure as for the No. 2 rear bumper reinforcement plate.
52171A
4.INSTALL NO. 1 REAR BUMPER REINFORCEMENT (for Type B)
Install the No. 1 rear bumper reinforcement with the 6 bolts.
52576
5.INSTALL REAR BUMPER SIDE RETAINER LH
Engage the guide and 2 claws to install the rear bumper side retainer LH.
Engage the clip as shown in the illustration.
52575
6.INSTALL REAR BUMPER SIDE RETAINER RH
Use the same procedure as for the LH side.
52451
7.INSTALL REAR BUMPER GUARD
for Type A:
Engage the 2 guides and 10 claws to install the rear bumper guard.
for Type B:
Engage the 12 claws to install the rear bumper guard.
Install the 2 clips.
81920
8.INSTALL REFLEX REFLECTOR ASSEMBLY LH
Engage the 2 claws to install the reflex reflector assembly LH.
Install the screw.
81910
9.INSTALL REFLEX REFLECTOR ASSEMBLY RH
Use the same procedure as for the LH side.
52164A
10.INSTALL REAR BUMPER PLATE LH
Engage the 6 claws to install the rear bumper plate LH.
52163A
11.INSTALL REAR BUMPER PLATE RH
Use the same procedure as for the LH side.
52592
12.INSTALL REAR BUMPER SIDE SEAL LH
Install the rear bumper side seal LH with the 2 clips.
52591
13.INSTALL REAR BUMPER SIDE SEAL RH
Use the same procedure as for the LH side.