Home › Vehicle Interior › SEAT BELT › REAR SEAT INNER BELT ASSEMBLY(for LH Side) › from 2017.10
RM19S0E _58 Vehicle Interior _051497 SEAT BELT _0248340 REAR SEAT INNER BELT ASSEMBLY(for LH Side) A

SEAT BELT  REAR SEAT INNER BELT ASSEMBLY(for LH Side)  INSTALLATION  


PROCEDURE

Hide 73480 1.INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY LH

a.
B501500C01
1.802,2.083 2.396,2.313 2.396,2.313 1.719,1.479 true 1.948,0.198 1.75,0.385 true 2.448,2.271 2.625,2.458 0.177,0.188 10 true *a 1.958,0.052 2.156,0.25 0.198,0.198 10 true *b
*a Arrow Mark
*b Convex


Install the rear seat inner with center belt assembly LH with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:
·

Install the anchor plate with the arrow mark facing forward.

·

Do not place the anchor plate over the convex area of the floor panel.




b.

Connect the connector.


Hide 71601A 2.INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY