FREEZE FRAME DATA
Whenever a PCS DTC is detected, the pre-crash safety city sensor stores the current vehicle (ECU or sensor) state as Freeze Frame Data.
CHECK FREEZE FRAME DATA
Connect the GTS to the DLC3.
Turn the ignition switch to ON.
Turn the GTS on.
Enter the following menus: Chassis / PCS/LDA/RSA/LVN /Trouble Codes.
According to the GTS display, select a DTC that stored freeze frame data.
Read the freeze frame data recorded when the DTC was stored.
| Tester Display | Measurement Item/Range | Normal Condition | Diagnostic Note |
|---|---|---|---|
| Lidar Detect Target Distance | Displays distance of the highest priority object which is detected by Lidar / 0 to 51.0 m. | Distance between the vehicle and a preceding vehicle | ·
When no preceding vehicle is detected, "0 m" (0 ft.) is displayed ·
Displays the distance between the pre-crash safety city sensor (laser sensor) and a preceding vehicle. |
| PCS Buzzer Demand | - | - | This item is displayed on the GTS but is not used |
| Skid Control Buzzer Demand | Displays meter buzzer condition / ON or OFF | ON: Meter buzzer operating
OFF: Meter buzzer not operating |
- |
| RSA Equipped Informtion | - | - | This item is displayed on the GTS but is not used |
| RSA Fusion Control | - | - | This item is displayed on the GTS but is not used |
| Traffic Sign Speed Unit | - | - | This item is displayed on the GTS but is not used |
| Estimated Traffic Division | - | - | This item is displayed on the GTS but is not used |
| LVN Equipped Informtion | - | - | This item is displayed on the GTS but is not used |
| History of Blockage | Displays whether there is pre-crash safety city sensor obstruction history / ON or OFF | ON: Pre-crash safety city sensor (camera and laser radar) obstruction history exists
OFF: Pre-crash safety city sensor (camera and laser radar) obstruction history does not exist |
- |
| History of Low Voltage | Displays whether there is low voltage history / ON or OFF | ON: Pre-crash safety city sensor low voltage history exists
OFF: Pre-crash safety city sensor low voltage history does not exist |
- |
| History of High Voltage | Displays whether there is high voltage history / ON or OFF | ON: Pre-crash safety city sensor high voltage history exists
OFF: Pre-crash safety city sensor high voltage history does not exist |
- |
| History of Low Temperature | Displays whether there is low temperature history / ON or OFF | ON: Pre-crash safety city sensor low temperature history exists
OFF: Pre-crash safety city sensor low temperature history does not exist |
- |
| History of High Temperature | Displays whether there is high temperature history / ON or OFF | ON: Pre-crash safety city sensor high temperature history exists
OFF: Pre-crash safety city sensor high temperature history does not exist |
- |
| Blockage Status | Displays whether there is a camera obstruction malfunction / ON or OFF | ON: Pre-crash safety city sensor (camera) obstructed
OFF: Pre-crash safety city sensor (camera) not obstructed |
- |
| Low Voltage Status | Displays whether there is a low voltage malfunction / ON or OFF | ON: Pre-crash safety city sensor low voltage malfunction exists
OFF: Pre-crash safety city sensor low voltage malfunction does not exist |
- |
| High Voltage Status | Displays whether there is a high voltage malfunction / ON or OFF | ON: Pre-crash safety city sensor high voltage malfunction exists
OFF: Pre-crash safety city sensor high voltage malfunction does not exist |
- |
| Low Temperature Status | Displays whether there is a low temperature malfunction / ON or OFF | ON: Pre-crash safety city sensor low temperature malfunction exists
OFF: Pre-crash safety city sensor low temperature malfunction does not exist |
- |
| High Temperature Status | Displays whether there is a high temperature malfunction / ON or OFF | ON: Pre-crash safety city sensor high temperature malfunction exists
OFF: Pre-crash safety city sensor high temperature malfunction does not exist |
- |
| Lidar Blockage Status | Displays whether laser sensor is dirty / ON or OFF | ON: Dirt on Pre-crash safety city sensor (laser sensor)
OFF: No dirt on Pre-crash safety city sensor (laser sensor) |
- |
| Control Mode | Displays ECU control mode status / Normal or Check Mode | Normal: Normal operation
Check: Operating in Control Mode |
- |
| PCS Operation State Retention Setting | Displays the setting of the PCS Operation State Retention Setting customize setting / ON or OFF | ON: PCS Operation State Retention Setting customize setting is set to ON
OFF: PCS Operation State Retention Setting customize setting is set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 1 | Displays the setting of the PCS Alarm Activation Distance Retention Setting 1 customize setting / ON or OFF | ON: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 1 customize setting is set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 2 | Displays the setting of the PCS Alarm Activation Distance Retention Setting 2 customize setting / ON or OFF | ON: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 2 customize setting is set to OFF |
- |
| PCS Alarm Activation Distance Retention Setting 3 | Displays the setting of the PCS Alarm Activation Distance Retention Setting 3 customize setting/ ON or OFF | ON: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to ON
OFF: PCS Alarm Activation Distance Retention Setting 3 customize setting is set to OFF |
- |
| The Number of DTCs | Number of trouble codes / 0 to 255 | Number of DTCs will be displayed | - |