CENTER AIRBAG SENSOR ASSEMBLY (for Hatchback) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE REAR CONSOLE BOX ASSEMBLY |
| 4. REMOVE AIRBAG SENSOR ASSEMBLY |
Check that the ignition switch is off.
Check that the cable is disconnected from the negative (-) battery terminal.
![]() |
Pull the lever down and disconnect the connector holder.
| *1 | Lever |
![]() |
Remove the 3 bolts and the airbag sensor assembly.