FRONT AIRBAG SENSOR (for Sedan) > REMOVAL |
| 1. PRECAUTION |
| 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 3. REMOVE FRONT BUMPER COVER |
| 4. REMOVE FRONT AIRBAG SENSOR |
![]() |
Remove the 2 bolts.
Disengage the 2 claws and remove the front airbag sensor.
![]() |
Disconnect the airbag connector.
| *a | Housing |
| *b | CPA |
| *c | Primary Locked State |
While pushing the housing, slide only the CPA backward (from a provisionally locked state).
Detach the connector while pushing the housing in the provisionally locked state.
![]() |
After detaching the connector, confirm that the CPA protrudes beyond the rear of the housing.