Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › ENGINE IMMOBILISER SYSTEM (for Sedan)

DTC    B2793    Transponder Chip Malfunction


DESCRIPTION

This DTC is output when: 1) during key code registration, a key malfunction occurs; or 2) the key code was unable to be registered properly. Follow the inspection procedure below.

DTC No.
DTC Detection Condition
Trouble Area
B2793
Transponder chip malfunction
Key

INSPECTION PROCEDURE

1.RE-REGISTER KEY
  1. Delete the DTC (Click here).

  1. Re-register the key (Click here), and check that the engine starts with the key.

    OK:
    Engine starts.



NG
REPLACE KEY
OK

END (INSPECTION FINISHED)