AMPLIFIER ANTENNA (for Sedan) > INSTALLATION |
| 1. INSTALL AMPLIFIER ANTENNA ASSEMBLY |
![]() |
Insert the hook into the body hole and install the amplifier antenna with the bolt.
| *a | Clamp |
| *b | Hook |
Engage the clamp.
Connect the 2 amplifier antenna connectors.
Connect the antenna cord connector.
| 2. INSTALL ROOF SIDE INNER GARNISH RH |
Engage the 4 clips and the claw and install the roof side inner garnish.
| 3. INSTALL REAR SEAT SIDE COVER RH |
Engage the 2 clips and the 4 claws and install the rear seat side cover.
| 4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH |
![]() |
Align the location mark with the paint mark first, and install the rear door opening trim weatherstrip, as shown in the illustration.
| *a | Paint Mark |
| *b | Location Mark |
| Area | Color |
| RH side | Green |
| LH side | Red |
| 5. INSTALL REAR DOOR SCUFF PLATE RH |
Engage the 7 claws and install the rear door scuff plate.
| 6. INSTALL LUGGAGE COMPARTMENT TRIM INNER PAD |
![]() |
Install the luggage compartment trim inner pad.
| 7. INSTALL SPARE WHEEL COVER ASSEMBLY |
![]() |
Install the spare wheel cover assembly.
| 8. INSTALL REAR SEAT ASSEMBLY RH |