Home › Drivetrain ยท CLUTCH › CLUTCH MASTER CYLINDER (for Sedan)

CLUTCH MASTER CYLINDER (for Sedan) > REMOVAL



1. REMOVE BRAKE BOOSTER ASSEMBLY
(Click here)


2. REMOVE CLUTCH RESERVOIR TUBE
  1. Loosen the clip and remove the clutch reservoir tube from the clutch master cylinder assembly.

    HINT:
    Use a container to collect the fluid.



3. DISCONNECT CLUTCH MASTER CYLINDER TO FLEXIBLE HOSE TUBE


C115313
  1. Using a union nut wrench, disconnect the flexible hose tube.

    HINT:
    Use a container to collect the fluid.



4. REMOVE CLUTCH MASTER CYLINDER ASSEMBLY


C115307
  1. Remove the 2 nuts and the clutch master cylinder assembly.



5. REMOVE CLUTCH MASTER CYLINDER PUSH ROD CLEVIS


    C247297E01
  1. Measure dimension A as shown in the illustration before loosening the lock nut.
    Text in Illustration 
    *1
    Lock Nut
    *2
    Push Rod Clevis

  1. Loosen the lock nut and remove the push rod clevis.

  1. Remove the lock nut.