STEERING WHEEL (for Sedan) > REMOVAL |
| 1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL |
| 2. PLACE FRONT WHEELS FACING STRAIGHT AHEAD |
| 3. REMOVE STEERING PAD |
![]() |
Using "Torx" socket wrench T30, loosen the 2 bolts completely.
Pull the steering pad toward you.
![]() |
Using a thin-bladed screwdriver, release the locking button.
Using a thin-bladed screwdriver, disconnect the 2 connectors.
Detach the horn terminal.
| 4. REMOVE STEERING WHEEL ASSEMBLY |
![]() |
Remove the nut and place matchmarks on the steering wheel assembly and steering column assembly.
![]() |
Using SST, remove the steering wheel assembly.