69220
1.INSTALL FRONT DOOR OUTSIDE HANDLE ASSEMBLY LH
Install the front door outside handle assembly LH in the direction indicated by the arrow as shown in the illustration.
Connect the connector.
69217F
2.INSTALL FRONT DOOR OUTSIDE HANDLE COVER LH
Apply MP grease to the sliding parts of the lock cylinder.
Install the front door outside handle cover LH with lock cylinder.
Using a T30 "TORX" socket wrench, tighten the screw.
Install the hole plug.
67832
3.INSTALL FRONT DOOR SERVICE HOLE COVER LH
67602
4.INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY LH
74232
5.INSTALL FRONT ARMREST BASE UPPER PANEL LH
67492A
6.INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH LH