Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD) › 2013.08–2017.10
RM30M0E _59 Vehicle Exterior _017122 DOOR / HATCH _0087462 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for Sedan RHD)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Install the fuel lid lock control cable sub-assembly to the 8 clamps as shown in the illustration.

B344837
1.167,5.052 1.083,5 false 1.219,5.156 1.125,5.208 true 2.365,4.979 2.271,5.094 true 2.344,4.896 2.26,4.854 false 3.688,4.969 3.51,5.01 true 3.615,4.646 3.542,4.604 false 5.917,4.469 6.052,4.51 true 5.604,4.781 5.677,4.917 false 6.073,3.281 5.927,3.323 true 5.99,3.615 5.917,3.688 false 6.438,2.219 6.531,2.417 true 6.5,2.469 6.406,2.573 false 6.448,0.938 6.646,0.875 true 6.396,0.99 6.469,1.115 false 6.688,0.781 7,0.938 0.313,0.156 10 false *1 6.49,1.063 6.802,1.219 0.313,0.156 10 false *2 6.281,2.146 6.594,2.302 0.313,0.156 10 false *1 6.26,2.552 6.573,2.708 0.313,0.156 10 false *2 5.771,3.26 6.083,3.417 0.313,0.156 10 false *1 5.792,3.688 6.104,3.844 0.313,0.156 10 false *2 6.052,4.396 6.365,4.552 0.313,0.156 10 false *1 5.635,4.906 5.948,5.063 0.313,0.156 10 false *2 3.354,4.958 3.667,5.115 0.313,0.156 10 false *1 3.375,4.531 3.688,4.688 0.313,0.156 10 false *2 2.115,5.073 2.427,5.229 0.313,0.156 10 false *1 2.094,4.771 2.406,4.927 0.313,0.156 10 false *2 0.958,5.177 1.271,5.333 0.313,0.156 10 false *1 0.917,4.917 1.229,5.073 0.313,0.156 10 false *2
*1 Fuel Lid Lock Control Cable Sub-assembly *2 Clamp



Hide 77377 2.INSTALL FUEL FILLER OPENING LID LOCK RETAINER

Hide 58510D 3.INSTALL FRONT FLOOR CARPET ASSEMBLY

a.

Engage the 4 guides and return the front floor carpet assembly to the rear floor with the clip.


b.

Engage the 5 guides and return the front floor carpet assembly to the driver side front floor.


Hide 77306 4.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Engage the 2 guides and connect the fuel lid lock control cable sub-assembly and luggage door lock control cable sub-assembly to the fuel lid lock open lever sub-assembly.


b.
B343666

Engage the hook and install the fuel lid lock open lever sub-assembly in the direction indicated by the arrow as shown in the illustration.


c.

Install the screw.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 64722B 5.INSTALL NO. 2 LUGGAGE COMPARTMENT TRIM COVER

Hide 62551F 10.INSTALL REAR SEAT SIDE GARNISH RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Sedan)>INSTALLATION


Hide 62552F 11.INSTALL REAR SEAT SIDE GARNISH LH

HINT:

Use the same procedure as for the RH side.


Hide 62413A 12.INSTALL CENTER PILLAR LOWER GARNISH RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Sedan)>INSTALLATION


Hide 73210 13.CONNECT FRONT SEAT OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>SEAT BELT>FRONT SEAT OUTER BELT ASSEMBLY>INSTALLATION


Hide 62331A 14.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Sedan)>INSTALLATION


Hide 62332A 15.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

HINT:

Use the same procedure as for the RH side.


Hide 62311B 16.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Sedan)>INSTALLATION


Hide 62111C 17.INSTALL COWL SIDE TRIM BOARD RH

HINT:

Use the same procedure as for the LH side.

Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING(for Sedan)>INSTALLATION


Hide 18.INSTALL REAR SEAT ASSEMBLY (for Fixed Seat Type)

Hide 19.INSTALL REAR SEAT ASSEMBLY (for Separate Seat Type)